Philips NE5534

INTEGRATED CIRCUITS 

NE/SA/SE5534/5534A 

Single low noise operational amplifier 

Product data 

Supersedes data of 1994 Aug 31 

File under Integrated Circuits, IC11 Data Handbook 

2001 Aug 03

Philips Semiconductors 

Product data 


NE/SA/SE5534/5534A 

DESCRIPTION 

The NE/SA/SE5534/5534A are single high-performance low noise 

operational amplifiers. Compared to other operational amplifiers, 

such as TL083, they show better noise performance, improved 

output drive capability, and considerably higher small-signal and 

power bandwidths. 

This makes the devices especially suitable for application in high 

quality and professional audio equipment, in instrumentation and 

control circuits and telephone channel amplifiers. The op amps are 

internally compensated for gain equal to, or higher than, three. The 

frequency response can be optimized with an external 

compensation capacitor for various applications (unity gain amplifier, 

capacitive load, slew rate, low overshoot, etc.) 

FEATURES 

• Small-signal bandwidth: 10 MHz 

• Output drive capability: 600 Ω, 10V RMS at V S = ±18 V 

• Input noise voltage: 4nV 

 

Hz 

• DC voltage gain: 100000 

• AC voltage gain: 6000 at 10 kHz 

• Power bandwidth: 200 kHz 

• Slew rate: 13 V/µs 

• Large supply voltage range: ±3 to ±20 V 

PIN CONFIGURATIONS 

BALANCE 

INVERTING INPUT 

NON-INVERTING 

V– 

NE/SA/SE5534/5534A 

D, N Packages 

1 

2 

3 

4 

TOP VIEW 

8 

7 

6 

5 

BALANCE/ 

COMPENSATION 

V+ 

OUTPUT 

Figure 1. Pin Configuration 

APPLICATIONS 

• Audio equipment 

• Instrumentation and control circuits 

• Telephone channel amplifiers 

• Medical equipment 

COMPENSATION 

SL00336 

ORDERING INFORMATION 

DESCRIPTION TEMPERATURE RANGE ORDER CODE DWG # 

8-Pin Plastic Small Outline (SO) package 0 °C to +70 °C NE5534D SOT96-1 

8-Pin Plastic Dual In-Line Package (DIP) 0 °C to +70 °C NE5534N SOT97-1 

8-Pin Plastic Small Outline (SO) package 0 °C to +70 °C NE5534AD SOT96-1 

8-Pin Plastic Dual In-Line Package (DIP) 0 °C to +70 °C NE5534AN SOT97-1 

8-Pin Plastic Dual In-Line Package (DIP) –40 °C to +85 °C SA5534N SOT97-1 

8-Pin Plastic Small Outline (SO) package –40 °C to +85 °C SA5534AD SOT96-1 

8-Pin Plastic Dual In-Line Package (DIP) –40 °C to +85 °C SA5534AN SOT97-1 

8-Pin Plastic Dual In-Line Package (DIP) –55 °C to +125 °C SE5534N SOT97-1 

8-Pin Plastic Dual In-Line Package (DIP) –55 °C to +125 °C SE5534AN SOT97-1 

2001 Aug 03 2 

853-0222 26833



Product data 

NE/SA/SE5534/5534A 

ABSOLUTE MAXIMUM RATINGS 

SYMBOL PARAMETER RATING UNIT 

V S Supply voltage ±22 V 

V IN Input voltage ±V supply V 

V DIFF Differential input voltage 1 ±0.5 V 

T amb 

Operating temperature range 

NE 0 to +70 °C 

SA –40 to +85 °C 

SE –55 to +125 °C 

T stg Storage temperature range –65 to +150 °C 

T j Junction temperature 150 °C 

P D Power dissipation at 25 °C 2 

SO8 package 750 mW 

DIP8 package 1150 mW 

Output short-circuit duration 3 

Indefinite 

T sld Lead soldering temperature (10 sec max) 230 °C 

NOTES: 

1. Diodes protect the inputs against over voltage. Therefore, unless current-limiting resistors are used, large currents will flow if the differential 

input voltage exceeds 0.6 V. Maximum current should be limited to ±10 mA. 

2. For operation at elevated temperature, derate packages based on the following junction-to-ambient thermal resistance: 

8-pin plastic DIP 105 °C/W 

8-pin plastic SO 160 °C/W 

3. Output may be shorted to ground at V S = ±15 V, T amb = 25 °C. Temperature and/or supply voltages must be limited to ensure dissipation 

rating is not exceeded. 

DC ELECTRICAL CHARACTERISTICS 

T amb = 25 °C; V S = ±15 V, unless otherwise specified. 1, 2, 3 

SYMBOL PARAMETER TEST CONDITIONS 

NE/SA5534/5534A 

SE5534/5534A 

Min Typ Max Min Typ Max 

V OS 0.5 4 0.5 2 mV 

Offset voltage Over temperature 5 3 mV 

∆V OS /∆T 5 5 µV/°C 

I OS 20 300 10 200 nA 

Offset current Over temperature 400 500 nA 

∆I OS /∆T 200 200 pA/°C 

I B 500 1500 400 800 nA 

Input current Over temperature 2000 1500 nA 

∆I B /∆T 5 5 nA/°C 

I CC Supply current 4 8 4 6.5 mA 

per op amp Over temperature 10 9 mA 

V CM Common mode input range ±12 ±13 ±12 ±13 V 

CMRR Common mode rejection ratio 70 100 80 100 dB 

PSRR Power supply rejection ratio 10 100 10 50 µV/V 

A VOL 

Large-signal voltage gain 

UNIT 

R L ≥ 600 Ω, V O = ±10 V 25 100 50 100 V/mV 

Over temperature 15 25 V/mV 

V OUT Output swing R L ≥ 600 Ω ±12 ±13 ±12 ±13 V 

Over temperature ±10 ±12 ±10 ±12 V 

R L ≥ 600 Ω; V S = ±18 V ±15 ±16 ±15 ±16 V 

R L ≥ 2 kΩ ±13 ±13.5 ±13 ±13.5 V 

Over temperature ±12 ±12.5 ±12 ±12.5 V 

R IN Input resistance 30 100 50 100 kΩ 

I SC Output short circuit current 38 38 mA 

NOTES: 

1. For NE5534/5534A, T MIN = 0 °C, T MAX = 70 °C 

2. For SA5534/5534A, T MIN = –40 °C, T MAX = +85 °C 

3. For SE5534/5534A, T MIN = –55 °C, T MAX = +125 °C 

2001 Aug 03 3



Product data 

NE/SA/SE5534/5534A 

AC ELECTRICAL CHARACTERISTICS 

T amb = 25 °C, V S = ±15 V, unless otherwise specified. 


NE/SA5534/5534A 

SE5534/5534A 


R OUT Output resistance 

A V = 30 dB closed-loop 

f = 10 kHz; R L = 600 Ω; 

0.3 0.3 Ω 

C C = 22 pF 

Transient response 

Voltage-follower, V IN = 50 mV 

R L = 600 Ω; C C = 22 pF, 

C L = 100 pF 

t R Rise time 20 20 ns 

Overshoot 20 20 % 

Transient response 

V IN = 50 mV, R L = 600 Ω 

C C = 47 pF, C L = 500 pF 

t R Rise time 50 50 ns 

Overshoot 35 35 % 

A V Gain f = 10 kHz, C C = 0 6 6 V/mV 

f = 10 kHz, C C = 22 pF 2.2 2.2 V/mV 

GBW Gain bandwidth product C C = 22 pF, C L = 100 pF 10 10 MHz 

SR 

Slew rate 

Power bandwidth 

UNIT 

C C = 0 13 13 V/µs 

C C = 22 pF 6 6 V/µs 

V OUT = ±10 V, C C = 0 pF 200 200 kHz 

V OUT = ±10 V, C C = 22 pF 95 95 kHz 

V OUT = ±14 V, R L = 600 Ω 70 70 kHz 

C C = 22 pF, V CC = ±18 V 

ELECTRICAL CHARACTERISTICS 

T amb = 25 °C, V S = 15 V, unless otherwise specified. 


V NOISE 

I NOISE 

Input noise voltage 

Input noise current 

NE/SA/SE5534 

NE/SA/SE5534A 


UNIT 

f O = 30 Hz 7 5.5 7 nV/√Hz 

f O = 1 kHz 4 3.5 4.5 nV/√Hz 

f O = 30 Hz 2.5 1.5 pA/√Hz 

f O = 1 kHz 0.6 0.4 pA/√Hz 

Broadband noise figure f = 10 Hz to 20 kHz; R S = 5 kΩ 0.9 dB 

Channel separation f = 1 kHz; R S = 5 kΩ 110 110 dB 

2001 Aug 03 4



Product data 

NE/SA/SE5534/5534A 

EQUIVALENT SCHEMATIC 

1 

8 

5 

7 

2 

3 

6 

4 

SL00337 

Figure 2. Equivalent Schematic 

2001 Aug 03 5



Product data 

NE/SA/SE5534/5534A 

TYPICAL PERFORMANCE CHARACTERISTICS 

GAIN (dB) 

Open-Loop Frequency Response 

120 

TYPICAL VALUES 

80 

C C = 0 

40 

C C = 22pF 

S 

(V/µs) 

16 

12 

8 

Slew Rate as a Function of 

Compensation Capacitance 

V S = +15V 

C C 

5 

8 

GAIN (dB) 

Closed-Loop Frequency Response 

60 

40 

20 

C C = 0; RF = 10kΩ; RE = 100Ω 

C C = 0; RF = 9kΩ; RE = 1kΩ 


0 

4 

TYP 

0 

C C = 22pF; RF = 1kΩ; RE = ∞ 

-40 

10 10 2 10 3 10 4 10 5 10 6 10 7 

f (Hz) 

0 

0 40 80 

C C (pF) 

-20 

10 3 10 4 10 5 10 6 10 7 10 8 

f (Hz) 

Large-Signal Frequency Response Output Short-Circuit Current Input Bias Current 

40 

30 

V S = +15V 


80 

60 

V S = +15V 

1,4 

1,2 

V S = +15V 

(V) 

Vo(p-p) 

20 

C C = 

0pF 

22pF 

47pF 

I O 

(mA) 

40 

TYP 

I I 

(µA) 

0,8 

TYP 

10 

20 

0,4 

0 

10 2 10 3 10 4 10 5 10 6 10 7 

f (Hz) 

0 

0 

-55 -25 0 25 50 75 100 +125 -55 -25 0 25 50 75 100 +125 

T amb (o C) T amb (o C) 

30 

Input Commom-Mode 

Voltage Range 


6 

Supply Current 

per Op Amp 

I O = 0 

10 2 

Input Noise 

Voltage Density 

20 

V IN (V) 

10 

NEG 

POS 

4 

I P 

I N 

(mA) 

2 

TYP 

(nV 

 

Hz ) 

10 

1 

10 –1 

TYP 

0 

0 

0 10 20 0 10 20 

Vp; -V N (V) 

Vp; -V N (V) 

Figure 3. Typical Performance Characteristics 

10 –2 10 10 2 10 3 10 4 

f (Hz) 

SL00338 

2001 Aug 03 6



Product data 

NE/SA/SE5534/5534A 

TYPICAL PERFORMANCE CHARACTERISTICS (Continued) 

Input Noise 

Total Input 

Current Density 

Noise Density 

10 2 

10 6 

10 2 



10 5 

10 

10 

10 4 

10Hz TO 20kHz 

10Hz 

Vn(rms) 10 3 

In(rms) 

(nV 

 

1kHz 

Vn(rm 

Hz ) 

(pA 

 

Hz ) 

1 

10 

TYP 

2 

s) 1 

(µV) 

200Hz TO 4kHz 

10 

10 –1 

THERMAL NOISE 

OF SOURCE 

10 –1 

1 

RESISTANCE 

10 –1 

10 –2 10 –2 

10 10 2 10 3 10 4 10 5 10 6 

10 –2 10 10 2 10 3 10 4 

f (Hz) 

R S (Ω) 

Figure 4. Typical Performance Characteristics (cont.) 

Broadband Input 

Noise Voltage 

0 10 20 

R S (Ω) 

SL00339 

TEST LOAD CIRCUITS 

V+ 

C C 

22kΩ 

100kΩ 

1 

8 

2 

- 

5534 

C C 

5 

7 

6 

R S 

25Ω 

V I 

8 

2 

+ 

5 

5534 

3 

6 

- 

R F 

R E 100pF 

600Ω 

3 

+ 

4 

V- 

Frequency Compensation and Offset Voltage 

Adjustment Circuit 

Figure 5. Test Load Circuits 

Closed-Loop Frequency Response 

SL00340 

2001 Aug 03 7



Product data 

NE/SA/SE5534/5534A 

NOISE TEST BLOCK DIAGRAM 

CAL 

OSC 

1Ω 

POWER 

SUPPLY 

CAL 

METER 

+V CC -V CC 

+ 

DUT 

- 

10kΩ 

+40dB 

BANDPASS 

AT 1kHz 

(nV 

 

Hz ) 

(nV 

 

Hz ) 

100Ω 

TEST BOARD 

BANDPASS 

AT 30Hz 

GND 

SL00341 

Figure 6. Noise Test Block Diagram 

2001 Aug 03 8



Product data 

NE/SA/SE5534/5534A 

SO8: plastic small outline package; 8 leads; body width 3.9 mm SOT96-1 

2001 Aug 03 9



Product data 

NE/SA/SE5534/5534A 

DIP8: plastic dual in-line package; 8 leads (300 mil) SOT97-1 

2001 Aug 03 10



Product data 

NE/SA/SE5534/5534A 

NOTES 

2001 Aug 03 11



Product data 

NE/SA/SE5534/5534A 

Data sheet status 

Data sheet status [1] 

Product 

status [2] 

Definitions 

Objective data 

Preliminary data 

Development 

Qualification 

This data sheet contains data from the objective specification for product development. 

Philips Semiconductors reserves the right to change the specification in any manner without notice. 

This data sheet contains data from the preliminary specification. Supplementary data will be 

published at a later date. Philips Semiconductors reserves the right to change the specification 

without notice, in order to improve the design and supply the best possible product. 

Product data 

Production 

Definitions 

Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For 

detailed information see the relevant data sheet or data handbook. 

Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one 

or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or 

at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended 

periods may affect device reliability. 

Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips 

Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or 

modification. 

Disclaimers 

Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can 

reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications 

do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. 

Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard 

cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no 

responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these 

products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless 

otherwise specified. 

Contact information 

For additional information please visit 

http://www.semiconductors.philips.com. Fax: +31 40 27 24825 

For sales offices addresses send e-mail to: 

sales.addresses@www.semiconductors.philips.com. 

This data sheet contains data from the product specification. Philips Semiconductors reserves the 

right to make changes at any time in order to improve the design, manufacturing and supply. 

Changes will be communicated according to the Customer Product/Process Change Notification 

(CPCN) procedure SNW-SQ-650A. 

[1] Please consult the most recently issued data sheet before initiating or completing a design. 

[2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL 

http://www.semiconductors.philips.com. 

© Koninklijke Philips Electronics N.V. 2001 

All rights reserved. Printed in U.S.A. 

Date of release: 12-01 

Document order number: 9397 750 09179 

 

 

2001 Aug 03 12

Philips NE5534

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?