Sony DSC-H2 Service Manual

Sony DSC-H2 Service Manual

Digital still camera
Hide thumbs Also See for DSC-H2:

Advertisement

SERVICE MANUAL
Ver. 1.2 2006. 10
Revision History
Revision History
How to use
How to use
Acrobat Reader
Acrobat Reader
Internal memory
Internal memory
ON BOARD
ON BOARD
Link
Link
SPECIFICATIONS
SPECIFICATIONS
SERVICE NOTE
SERVICE NOTE
DISASSEMBLY
DISASSEMBLY
• Precaution on Replacing the SY-150 board
Note :
The components identified by
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.
DSC-H2_L2
9-876-937-31
BLOCK DIAGRAMS
BLOCK DIAGRAMS
FRAME SCHEMATIC DIAGRAMS
FRAME SCHEMATIC DIAGRAMS
SCHEMATIC DIAGRAMS
SCHEMATIC DIAGRAMS
Note :
Les composants identifiés par
une marque 0 sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.
Sony EMCS Co.
DSC-H2
US Model
Canadian Model
AEP Model
UK Model
Australian Model
Chinese Model
Argentina Model
Hong Kong Model
Korea Model
Tourist Model
PRINTED WIRING BOARDS
PRINTED WIRING BOARDS
REPAIR PARTS LIST
REPAIR PARTS LIST
DIGITAL STILL CAMERA
Published by Kohda TEC
2
LEVEL
E Model
2006J1600-1
©2006.10

Advertisement

Table of Contents
loading

Summary of Contents for Sony DSC-H2

  • Page 1 0 sont critiques 0 are critical for safety. pour la sécurité. Replace only with part number Ne les remplacer que par une specified. pièce portant le numéro spécifié. DIGITAL STILL CAMERA 2006J1600-1 DSC-H2_L2 ©2006.10 Sony EMCS Co. 9-876-937-31 Published by Kohda TEC...
  • Page 2: Specifications

    These specifications are extracted from instruction manual of DSC-H2 (2-673-166-11). SPECIFICATIONS Camera [LCD screen] BC-CS2A/CS2B Ni-MH battery charger LCD panel 5.1 cm (2.0 type) TFT drive [System] Power requirements AC 100 to 240 V, 50/60 Hz, Total number of dots Image device 7.18 mm (1/2.5 type) color...
  • Page 3 MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
  • Page 4: Table Of Contents

    TABLE OF CONTENTS SERVICE NOTE 1-1. DESCRIPTION ON SELF-DIAGNOSIS DISPLAY ······ 1-1 1-2. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY ·················································· 1-2 1-3. PRECAUTION ON REPLACING THE SY-150 BOARD ··········································································· 1-3 1-4. VIDEO OUT DEFAULT DATA CHECK ······················· 1-3 1-5.
  • Page 5: Service Note

    • The type of memory stick that cannot be Replace the memory stick. used by this machine, is inserted. C:13:01 MS ERROR Format the memory stick with the DSC-H2. • Data is damaged. • Unformatted memory stick is inserted. Flash LED Checking of flash unit or replacement of...
  • Page 6: Method For Copying Or Erasing The Data In

    1-2. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the internal memory.) Note: 1 When replacing the SY-150 board, erase the data in internal memory of the board before replacement. Note: 2 When replacing the SY-150 board or the IC202 on the SY-150 board, execute formatting and initialize the internal memory after replacement.
  • Page 7: Board

    1-3. PRECAUTION ON REPLACING THE SY-150 BOARD • The Repair Board has already been adjusted. Re-initialization or EVR data copy from the set before repair is not required. • Perform “VIDEO OUT Default Data Check” and “Initial Language Data Check” mentioned below, and also the adjustment items necessary after SY Board replacement.
  • Page 8: Disassembly

    2. DISASSEMBLY Link Link DISASSEMBLY DISASSEMBLY HELP HELP COMMON NOTE FOR DISASSEMBLY COMMON NOTE FOR DISASSEMBLY DSC-H2_L2...
  • Page 9: Note For Repair

    10 seconds. capacitor is handled by hand. The electric shock is caused by the charged voltage which is kept without discharging when the main power of the DSC-H2 is simply turned off. Therefore, the 1k Ω /1W Short jig ( remaining voltage must be discharged as described below.
  • Page 10 2. DISASSEMBLY 2. DISASSEMBLY 2. DISASSEMBLY The following flow chart shows the disassembly procedure. 2-1. DISASSEMBLY 1 Claw 5 Flexible board (from the LCD unit) 1 Three screws (M1.7x4) 2 Claw 6 Two tapping screws (M1.7x4) 2 Three screws (M1.7x4) 3 Remove the LCD unit in the 7 SW-478 flexible board 3 Cabinet (rear) section...
  • Page 11 2. DISASSEMBLY 2. DISASSEMBLY Refer to page 2-1 "DISCHARGING OF THE FLASHLIGHT POWER SUPPLY CAPACITOR, when discharging the capacitor. HELP 04 HELP 05 HELP 06 HELP 07 HELP 08 1 Turn the flexible board. Claw 1 Two tapping screws (M1.7x4) 1 Tapping screw (M1.7x4) 2 Tapping screw (M1.7x5) Three harnesses (HA-001) (Red, White, Blue)
  • Page 12 HELP Disassembling and assembling procedures that require attention are described here. HELP 01 When attaching the fuse replacement caution label to the SY-150 board, cover the harness of the loudspeaker with the fuse replacement caution label. Fuse replacement caution label Harnesses of loudspeaker HELP 02...
  • Page 13 HELP 05 HELP 04 When installing the ST section, route the When installing the ST section, route the Harness (HA-004) (Blue) ,Harness (HA-004)(White), Harness (HA-004) (Blue) ,Harness (HA-004)(White), and Harness (HA-004) (Red) as shown in the figure. and Harness (HA-004) (Red) as shown in the figure. ST section Route the harnesses with the ST cover closed.
  • Page 14 HELP 07 Microphone holder Install the microphone tilted as shown in the figure below. Microphone cushion (B) Microphone holder Microphone Microphone Microphone Microphone cushion cushion (B) Microphone cushion HELP 08 When removing the lens ring, remove the screw and strap sheet metal (R) first. 1 Tapping screw (M1.7x4) Slide the cap lever in the direction of arrow while taking care that the cap...
  • Page 15: Block Diagrams

    3. BLOCK DIAGRAMS Link Link OVERALL BLOCK DIAGRAM (1/2) POWER BLOCK DIAGRAM (1/2) OVERALL BLOCK DIAGRAM (2/2) POWER BLOCK DIAGRAM (2/2) DSC-H2_L2...
  • Page 16 3. BLOCK DIAGRAMS 3-1. OVERALL BLOCK DIAGRAM (1/2) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. MS-030 FLEXIBLE LENS UNIT CD-621 FLEXIBLE CD-619 BOARD SY-150 BOARD (1/2) FLAT CABLE BOARD IRIS SHUTER...
  • Page 17: Overall Block Diagram

    3-2. OVERALL BLOCK DIAGRAM (2/2) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. SY-150 BOARD (2/2) ST-003 ST-142 BOARD ST-144 FLEXIBLE BOARD FLAT CABLE ST UNREG (3/8) D102 IC101 (RECT) T101...
  • Page 18: Power Block Diagram

    3-3. POWER BLOCK DIAGRAM (1/2) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. ST-142 BOARD ST-003 SY-150 BOARD (1/2) FLEXIBLE FLAT CABLE T101 D102(RECT) XE H FLASH F001 ST UNREG UNREG ST UNREG...
  • Page 19 3-4. POWER BLOCK DIAGRAM (2/2) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. SY-150 BOARD (2/2) L303 HDVDD CD-619 BOARD (2/8) CD-621 L302 TG 3V FLEXIBLE CP301 DRVDD CAM 3.2V FB308 BOARD...
  • Page 20: Printed Wiring Boards And Schematic Diagrams

    4. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS 4-1. FRAME SCHEMATIC DIAGRAM CN402 BL_H BL_H PL-045 BOARD BL_L PLUNGER BL_L SW-473 BOARD (1/2) LCD PANEL (2/2) FUNCTION SWITCH CN403 CN401 BATTERY AF-105 FLEXIBLE BOARD AF LED,LENS COVER SW BATTERY SW-478 FLEXIBLE BOARD SY-SW RELAY CN704 MODE_DIAL0...
  • Page 21: Schematic Diagrams

    4-2. SCHEMATIC DIAGRAMS Link Link CONTROL SWITCH BLOCK CD-619 BOARD (CCD IMAGER) (MODE/JOG DIAL, FUNCTION SW) AF-105 FLEXIBLE BOARD SW-473 BOARD (1/2) (LCD PANEL) (AF LED, LENS COVER SW) SW-473 BOARD (2/2) JK-306 FLEXIBLE BOARD (FUNCTION SWITCH) (AV/USB JACK) ST-142 BOARD CD-621 FLEXIBLE BOARD (FLASH DRIVE) (SY-CD RELAY)
  • Page 22 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS THIS NOTE IS COMMON FOR SCHEMATIC DIAGRAMS (In addition to this, the necessary note is printed in each block) (For schematic diagrams) 1. Connection • All capacitors are in µF unless otherwise noted. pF : µ Pattern box Color bar chart Link...
  • Page 23 4-2. SCHEMATIC DIAGRAMS CD-619 BOARD NO MARK:REC/PB MODE CCD IMAGER R :REC MODE P :PB MODE XX MARK:NO MOUNT CN001 IC002 IC002 ICX624BQF-13 CCD IMAGER Note: IC002 is not included in this VHLD COMPLETE of CD-619 board. 15 16 17 18 19 20 21 22 23 24 25 26 27 28 CD-621 IC001 C005...
  • Page 24 CN402 SW-473 BOARD(1/2) BL_L LCD PANEL BL_L XX MARK:NO MOUNT BACK LIGHT BL_H CN401 BL_H BL_L BL_L VCOMI BL_H BL_H XRST XSANN_RST_OUT XCS_PNAEL XSCK REG_GND VSYNC SAN1_SO HSYNC XSAN1_SCK REG_GND DATA5 LCD_HD DATA4 LCD_VD DATA3 REG_GND SW-478 DATA2 2.0 INCH FLEXIBLE REG_GND BOARD...
  • Page 25 SW-473 BOARD(2/2) FUNCTION SWITCH XX MARK:NO MOUNT S508 S504 RB501 ZOOM W ZOOM T 2200 x 4 R501 S501 5600 MENU KEY_AD1 S502 S505 KEY_AD0 R502 DISP R505 D_3.2V (1/2) D503 RB502 SML-310LTT86 2200 x 4 R503 S510 XACCESS_LED 5600 RIGHT S506 (ACCESS)
  • Page 26 • Refer to page 4-3 for mark 0. ST-142 BOARD NO MARK:REC/PB MODE R :REC MODE FLASH DRIVE T101 P :PB MODE CONVERTER TRANSFORMER XX MARK:NO MOUNT L101 CN101 4.7uH ST_UNREG D102 C101 C102 C106 CRF02(TE85R) ST_UNREG LND101 6.3V 6.3V 6.3V XE_H ST_UNREG...
  • Page 27 Ver. 1.1 2006. 06 • Refer to page 4-3 for mark 0. PL-045 BOARD ST-144 BOARD FLASH PLUNGER XX MARK:NO MOUNT XX MARK:NO MOUNT CN201 D202 D203 MAZW068H0LS0 1SS355TE-17 LND005 REG_GND LND001 XE_+ XE_H REG_GND C201 RY201 AF-105 STRB_PLUNGER (PLUNGER) FLEXIBLE R001 BOARD...
  • Page 28: Control Switch Block

    CONTROL SWITCH BLOCK MODE/JOG DIAL, FUNCTION SW R111 R109 R112 S107 XX MARK:NO MOUNT S106 (MODE DIAL) STEADY SHOT FINDER S101 S102 R104 R115 FOCUS R105 R116 R106 R117 R101 R107 R118 4900 R110 R114 R108 2200 R103 S103 R102 9300 SHUTTER S105...
  • Page 29 Ver. 1.1 2006. 06 AF-105 FLEXIBLE BOARD AF LED,LENS COVER SW D001 XX MARK:NO MOUNT DOR5073 (AF LED) S001 (LENS COVER OPEN) LND001 XLENS_COVER_SENSE LND002 REG_GND LND003 D_3.2V LND004 XAF_LED SY-150 LND005 LND011 XSTRB_POPUP XSTRB_POPUP BOARD LND006 LND012 (7/8) REG_GND REG_GND CN705 PL-045...
  • Page 30 SW-478 FLEXIBLE BOARD CD-621 FLEXIBLE BOARD SY-SW RELAY SY-CD RELAY XX MARK:NO MOUNT XX MARK:NO MOUNT BL_L BL_L BL_L BL_L BL_H BL_H BL_H BL_H XSAN_RST_OUT XSAN_RST_OUT XCS_PANEL XCS_PANEL REG_GND REG_GND SAN1_SO SAN1_SO XSAN1_SCK XSAN1_SCK VHLD VHLD REG_GND REG_GND LCD_HD LCD_HD LCD_VD LCD_VD SY-150...
  • Page 31 MS-030 FLEXIBLE FLAT CABLE ST-003 FLEXIBLE FLAT CABLE SY-MS RELAY SY-ST RELAY XX MARK:NO MOUNT XX MARK:NO MOUNT REG_GND REG_GND REG_GND REG_GND MS_BS MS_BS REG_GND REG_GND MS_D1 MS_D1 REG_GND REG_GND MS_D0 MS_D0 REG_GND REG_GND MS_D2 MS_D2 ST_5V ST_5V SY-150 MS-307 SY-150 ST-142 XMS_IN...
  • Page 32: Printed Wiring Boards

    4-3. PRINTED WIRING BOARDS Link Link CD-619 BOARD PL-045 BOARD SW-473 BOARD AF-105 FLEXIBLE BOARD ST-142 BOARD JK-306 FLEXIBLE BOARD ST-144 BOARD CD-621 FLEXIBLE BOARD MS-307 BOARD SW-478 FLEXIBLE BOARD COMMON NOTE FOR PRINTED WIRING BOARDS MOUNTED PARTS LOCATION COMMON NOTE FOR PRINTED WIRING BOARDS MOUNTED PARTS LOCATION DSC-H2_L2...
  • Page 33 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS THIS NOTE IS COMMON FOR WIRING BOARDS (In addition to this, the necessary note is printed in each block) (For printed wiring boards) • Chip parts. • : Uses unleaded solder. Transistor Diode •...
  • Page 34 4-3. PRINTED WIRING BOARDS CD-619 (4 layers) • : Uses unleaded solder. CD-619 BOARD(SIDE A) CD-619 BOARD(SIDE B) Note:IC002 is not included in this COMPLETE of CD-619 board C003 C004 R009 C008 IC002 1-869-220- C006 Q001 CN001 CL007 1-869-220- CL006 DSC-H2_L2 CD-619 4-43...
  • Page 35 SW-473 (4 layers), ST-142 (2 layers) • : Uses unleaded solder. SW-473 BOARD(SIDE A) SW-473 BOARD(SIDE B) S502 S501 C401 DISP MENU R504 R505 D503 S510 ACCESS LND501 S508 RIGHT S507 S505 DOWN S506 ZOOM SW-473 >EP GW< CN401 1-869-219 R502 L402 S503...
  • Page 36 Ver. 1.1 2006. 06 ST-144 (1 layer), MS-307 (4 layers), PL-045 (2 layers) • : Uses unleaded solder. ST-144 BOARD PL-045 BOARD PL-045 BOARD (SIDE B) D001 (SIDE A) LND001 LND002 R001 C003 CN201 LND003 R002 S201 (FLASH POP UP) LND006 LND005 RY201...
  • Page 37 Ver. 1.1 2006. 06 AF-105 FLEXIBLE (1 layer), JK-306 FLEXIBLE (1 layer), CD-621 FLEXIBLE (2 layers), SW-478 FLEXIBLE (1 layer) • : Uses unleaded solder. AF-105 FLEXIBLE BOARD CD-621 FLEXIBLE BOARD LND011 LND012 LND013 LND014 LND015 LND016 D001 1-869-222- AF LED LND010 LND009 LND008...
  • Page 38: Mounted Parts Location

    4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS 4-4. MOUNTED PARTS LOCATION no mark : side A * mark : side B CD-619 BOARD SW-473 BOARD ST-142 BOARD * C001 C401 C101 * C002 C402 C102 * C003 C405 C103 * C004 C406 C104...
  • Page 39: Repair Parts List

    NOTE NOTE 5. REPAIR PARTS LIST NOTE: Characters A to Z of the electrical parts list indicate location of exploded views in which the desired part is shown. EXPLODED VIEWS EXPLODED VIEWS Link Link OVERALL SECTION CABINET (REAR) SECTION MAIN SECTION LENS SECTION CABINET (FRONT) SECTION ST SECTION...
  • Page 40 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST NOTE: • -XX, -X mean standardized parts, so they may have some differences from When indicating parts by reference number, the original one. please include the board name. •...
  • Page 41 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1. EXPLODED VIEWS 5-1-1. OVERALL SECTION Cabinet (front) section (See page 5-7) - 1 5 Lens section (See page 5-6) Main section (See page 5-5) LCD9001 Cabinet (rear) section (See page 5-4) Ref.
  • Page 42 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1-2. CABINET (REAR) SECTION ns : not supplied Ref. No. Part No. Description Ref. No. Part No. Description X-2108-908-1 CABINET (REAR) ASSY 2-673-303-01 LID, JK 2-673-247-01 LID, DC * 55 2-685-484-01 CUSHION (REAR) 2-673-333-01 WINDOW, LCD DSC-H2_L2...
  • Page 43 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1-3. MAIN SECTION ns : not supplied LCD9002 BT9001 - 3 0 BT001 - 1 5 SP9001 : BT001 (Lithium battery) SY-150 board on the mount position. (See page 4-52) Ref. No. Part No.
  • Page 44 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1-4. LENS SECTION ns : not supplied IC002 Ref. No. Part No. Description Ref. No. Part No. Description A-1177-128-A OPTICS UNIT (B191A) (SERVICE) 2-666-551-21 SCREW, TAPPING, P2 * 152 2-672-563-01 SHEET (LNS), RADIATION * 158 2-672-562-01 SHEET (CD), RADIATION 2-592-693-01 PLATE (T), LIGHT INTERCEPTION...
  • Page 45 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1-5. CABINET (FRONT) SECTION ns : not supplied ST section (See page 5-8) MIC9001 Ref. No. Part No. Description Ref. No. Part No. Description X-2108-906-1 CABINET (FRONT) ASSY * 211 2-673-302-01 HOLDER, AF 3-080-204-11 SCREW, TAPPING, P2 1-831-558-11 FLEXIBLE FLAT CABLE (ST-003) 2-673-230-01 SCREW, TRIPOD...
  • Page 46 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1-6. ST SECTION C105 Blue RY201 White PRECAUTION DURING SOLENOID PLUNGER INSTALLATION 5 PL-045 board 1 Close the ST cover. 3 Two claws 6 Apply the soldering in two points. 2 Plunger solenoid 4 Solenoid retainer 7 Tapping screw (M1.7x4) Ref.
  • Page 47 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST Checking supplied accessories. Make sure that the following accessories are supplied with your camcorder. 0 Ni-MH battery charger BC-CS2A/CS2B (1) HR6 (size AA) Nickel-Metal Adaptor ring (1) (US,CND,JE model) Hydride batteries (2) 2-629-861-01 1-479-378-11 (not supplied)
  • Page 48 Ver. 1.1 2006. 06 AF-105 CD-619 JK-306 MS-307 PL-045 ST-142 5-2. ELECTRICAL PARTS LIST Ref. No. Part No. Description Ref. No. Part No. Description A-1176-913-A AF-105 FLEXIBLE BOARD, COMPLETE A-1176-912-A MS-307 BOARD, COMPLETE ****************************** *********************** (D001 (AF LED) is not supplied, but this is included in AF-105 flexible board complete.) <...
  • Page 49 ST-142 ST-144 SW-473 SY-150 Ref. No. Part No. Description Ref. No. Part No. Description < CONNECTOR > < DIODE > * CN101 1-816-644-51 FFC/FPC CONNECTOR (LIF) 12P D501 8-719-056-23 DIODE MA2S111-(K8).SO D502 6-500-776-01 DIODE MAZW068H0LS0 < DIODE > D503 8-719-064-07 DIODE SML-310LTT86 (ACCESS) D101 8-719-056-54 DIODE MAZS068008SO <...
  • Page 50 After change CD-619 BOARD (SIDE A) (Location: B-3) 4-43 11 12 1-869-220- 1-869-220- CD-619 BOARD (SIDE B) (Location: B-3) 1-869-220- 1-869-220- C006 C006 4-44 Q001 Q001 CL007 CL007 CL006 CL006 2006J1600-1 DSC-H2_L2 ©2006.10 Sony EMCS Co. 9-876-937-83 Published by Kohda TEC...
  • Page 51 : Added portion Page Before change After change SW-473 BOARD (SIDE A) (Location: C-4) CN403 CN403 4-45 1-869-219- 1-869-219- CN402 CN402 SW-473 BOARD (SIDE B) (Location: C-1) 1-869-219- 1-869-219- 4-46 MS-307 BOARD (SIDE A) 4-47 1-869-221- 1-869-221- 11 12 MS-307 BOARD (SIDE B) 1-869-221- 1-869-221- 4-48...
  • Page 52 5. REPAIR PARTS LIST 5-1. EXPLODED VIEWS : Changed portion Page Before change After change 5-1-1. OVERALL SECTION Ref. No. Part No. Description Ref. No. Part No. Description * 10 2-685-307-01 RETAINER, TAPE (CD) * 10 2-694-714-01 TAPE CD RETAINER (420) * 11 2-673-339-01 LABEL, FUSE REPLACEMENT CAUTION * 11...
  • Page 53 [Description of main button functions on toolbar of the Adobe Acrobat Reader Ver5.0 (for Windows)] Toolbar Printing a text Reversing the screens displayed once • To reverse the previous screens (operation) one by one, click 1. Click the Print button 2.
  • Page 54: Revision History

    Reverse 987693733.pdf Revision History S.M. Rev. Ver. Date History Contents issued 2006.02 Official Release — — 2006.06 Correction-1 • Correction of schematic diagrams • Correction of printed wiring boards • Correction of repair parts list S.M. correction: Page; 4-14, 4-17, 4-48, 4-49, 5-10 2006.10 Supplement-1...

This manual is also suitable for:

Cyber-shot dsc-h2

Table of Contents