Chapter 4 ADJUST MENU SETTINGS
4.8 COM PORT SETTING
4.8 COM PORT SETTING
External sensor signals are to be entered to this radar via a COM port.
The radar equipment has three communication ports. For signals to be input from sensors
or to be output to the sensors, communication ports need to be set in accordance with the
sensors.
"COM Port Setting" operations
1 Open
"COM Port Setting" menu appears.
4.8.1
BAUD RATE SETTING
Set the baud rate of the signal to be entered into the COM port.
Ports on the menu represent following connectors.
1. Gyro/Compass
2. GPS
3. NMEA1
Reference:
When the automatic mode is selected, the baud rate is set by the setting of the connected
equipment.
4-36
COM Port Setting
from the Adjust Menu.
J5 HDG
J3 GPS
J4 NMEA